Lectern Quick Start - SMART Board

Below are steps to start up the SMART Board for use with the built-in PC or Bluray player.

Desktop PC
  • Make sure that the monitor light is on - the button should be lit blue.  
  • Press the keyboard's spacebar to activate the monitor screen. 
  • Make sure that the PC button is selected. If the button is not lit, then press to select it. 
  • Press the control panel's ON button to turn on the projector. The button will blink until the projector is fully powered on.
  • You can log on to the PC while the projector is warming up.
  • If you have a USB flash drive or remote presenter you can plug in the drive and receiver into the USB 1 and 2 slots.
  • Rotate the volume control knob until the red light appears at the top. 
  • Adjust the speaker volume in the taskbar.

If you wish to interact with the SMART Board using a pen or your finger, proceed to the next section. 

Bluray Player
  • Press the control panel's ON button to turn on the projector.
  • Press the control panel's BLURAY button.
  • The projected surface may display IN1606: Input 5 No Signal (player is not yet turned on).
  • Press the DVD player on button to turn it on (light will turn white). 
  • Press the eject button and insert your DVD.
  • Do not use the Play button, which will display This operation is currently prohibited for this disc. 
  • Use the remote and point it towards the player. Use the center navigation arrows in the center of the remote to move to scene that you want to play. Press the enter button inside the navigation arrows to play your scene.
  • Use the POP UP/MENU button the remote, again pointing it towards the player, to go to the previous menu.  

SMART Board (pen and finger touch)
  • Make sure that the tray light is turned on. The status light blinks green during your logon and the startup of the SMART Tools software. If the light is red, then turn on the tray power. You may have log back on. 
  • The SMART Tools toolbar will display on the left side of your screen.
  • Below are the components of the SMART Board tray.